How it works

Factory Reset

To reset the device to factory settings:

Press and hold the input button for about 5000 milliseconds. Then release the button to factory reset the device. The device will then reboot and enter setup mode.

Indicators

The device has the following indicators:

Setup

  • Setup mode: LED blinks continuously, about 4 seconds per cycle, with white color.
  • Setup started: LED blinks continuously, about 1 second per cycle, with white color.
  • Setup complete: LED shows the default state of the device and stops any ongoing patterns.
  • Setup failed: LED shows the default state of the device and stops any ongoing patterns.
  • setup_mode_end: LED shows the default state of the device and stops any ongoing patterns.
  • Device ready: LED shows the default state of the device and stops any ongoing patterns.

    Functional

  • Factory reset triggered: LED blinks continuously, about 0.4 seconds per cycle, with white color.
  • Forced rollback triggered: LED blinks continuously, about 0.4 seconds per cycle, with white color.
  • Driver mode: LED blinks continuously, about 1 second per cycle, with white color.

    Test Mode

  • Test mode start: LED blinks for 1.5 seconds, about 0.5 seconds per cycle, with white color.
  • Test mode complete: LED blinks for 3 seconds, about 0.5 seconds per cycle, with white color.

    Identification

  • Identification start: LED blinks continuously, about 1 second per cycle, with white color.
  • Identification stop: LED shows the default state of the device and stops any ongoing patterns.
  • Identification blink: LED blinks for 1 second, about 1 second per cycle, with white color.
  • Identification breathe: LED blinks for 15 seconds, about 1 second per cycle, with white color.
  • Identification okay: LED blinks for 1.4 seconds, about 0.7 seconds per cycle, with white color.
  • Identification channel change: LED blinks for 8 seconds, about 8 seconds per cycle, with white color.
  • Identification finish effect: LED shows the default state of the device and stops any ongoing patterns.
  • Identification stop effect: LED shows the default state of the device and stops any ongoing patterns.